Victron Energy SmartSolar 150/45-Tr 45A MPPT Charge Controller

Victron Energy SmartSolar 150/45-Tr 45A MPPT Charge Controller

  • $299.99

Victron Energy SmartSolar 150/45 45A MPPT Charge Controller

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Remote on-off
To connect for example to a VE.BUS BMS.

Programmable relay
Can be programmed to trip on an alarm, or other events.

 SmartSolar Charge Controller  150/45
 Battery voltage  12 / 24 / 48V Auto Select
 Rated charge current  45A
 Nominal PV power, 12V  650W
 Nominal PV power, 24V  1300W
 Nominal PV power, 36V  1950W
 Nominal PV power, 48V  2600W
 Max. PV short circuit current  50A
 Maximum PV open circuit voltage  150V absolute maximum coldest conditions
 145V start-up and operating maximum
 Maximum efficiency  98%
 Self-consumption  Less than 35mA @ 12V / 20mA @ 48V
 Charge voltage 'absorption'  Default setting: 14,4 / 28,8 / 43,2 / 57,6V
 (adjustable with: rotary switch, display, VE.Direct or Bluetooth)
 Charge voltage 'float'  Default setting: 13,8 / 27,6 / 41,4 / 55,2V
 (adjustable: rotary switch, display, VE.Direct or Bluetooth)
 Charge voltage 'equalization'  Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable)
 Charge algorithm  multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm
 Temperature compensation  -16 mV / -32 mV / -64 mV / °C
 Protection  PV reverse polarity / Output short circuit / Over temperature
 Operating temperature  -30 to +60°C (full rated output up to 40°C)
 Humidity  95%, non-condensing
 Maximum altitude  5000m (full rated output up to 2000m)
 Environmental condition  Indoor, unconditioned
 Pollution degree  PD3
 Data communication port  VE.Direct or Bluetooth
 Remote on/off  Yes (2 pole connector)
 Programmable relay  DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC
 Parallel operation  Yes (not synchronized)
 Colour  Blue (RAL 5012)
 PV terminals  35 mm² / AWG2 (Tr models)
 Battery terminals  35mm² / AWG2
 Protection category  IP43 (electronic components), IP22 (connection area)
 Weight  3 kg
 Dimensions (h x w x d)  185 x 250 x 95 mm
 Safety  EN/IEC 62109-1, UL 1741, CSA C22.2

We Also Recommend