Epsolar 100A 150V MPPT Charge Controller Tracer 10415AN

Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.

With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, Support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.

Product Features:

High quality & low failure rate components of ST and Infineon to ensure the product’s life
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98.7%
Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
The wider range of MPP operating voltage.
Auto control system to limit the charging power & current go over the rated value.
Support 4 charging options: Sealed, Gel, Flooded and User.
Battery temperature compensation function
Real-time energy recording and statistical function
Automatic over-temperature power reduction function
Hundred percent full load operation in working environment temperature range within charging & discharging
Support up to 8 units in parallel to expand system
Load relay control external load switch signal to realize diversified load work modes
The first and the second disconnection of load control, contain two relay’s contact.
Auto-control of utility and generator relay design
Utility or generator auto-control relays make it easy to compose the hybrid power system
The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol

To monitor or set the parameters by using the phone Apps or PC software.

Item	Tracer 10415AN
Nominal System Voltage	12/24/36/48VDC or Auto
Battery Input Voltage Range	8V~68V
Battery Type	Sealed/Gel/Flooded/User
Battery fuse	150A/58V
Rated charge current	100A
Rated charge Power	1250W/12V 2500W/24V 3750W/36V 5000W/48V
Max. PV open circuit voltage	150V (1) 138V (2)
MPP Voltage Range	(Battery Voltage +2V) ~108V (3)
Tracking efficiency	=99.5%
Conversion efficiency	=98.7%
Temperature compensate coefficient	-3mV/?/2V(Default)
Self-consumption	98mA/12V;60mA/24V;50mA/36V;46mA/48V
Self-consumption	Common negative
Grounding	Rated Value:5A/30VDC; Max. Value:0.5A/60VDC
RS485 interface	RS485(RJ45)
LCD backlight time	60S(Default)
Ambient temperature range	-25 C~+45 C
LCD temperature range	-20 C ~+70C
Storage temperature range	-30 C~+85C
Humidity	=95%, N.C.
Enclosure	IP20
Dimension	394×242×143mm / 16" x 10" x 5.5"
Mounting dimension	300×230mm
Terminal	2AWG(35mm2)
Recommended cable	35mm2(2AWG)
Weight	7.4kg / 16.5LBS

Canadian Solar 275 Watt Poly Solar Panel

SolarEngine 3000W 12V Pure Sine Wave Inverter

Lifepo4 Lithium 12V 100Ah Battery

EpSolar Tracer 100amp MPPT Solar Charge Controller