Panier 0
Magnum PT-100 100A MPPT Charge Controller

Magnum PT-100 100A MPPT Charge Controller

Magnum PT-100 100A MPPT Charge Controller

Made in USA

The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries.  The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery.
 

FEATURES:

  • Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency
  • Multi-state Charging for maximizes system performance and improves battery life
  • Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes
  • Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage
  • GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering
  • AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements
  • Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection
  • Supports large PV arrays - a single controller supports a large PV array up to 6600W
  • High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode
  • Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
  • Convenient Installation - Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit
  • On-site Updates - The PT-100’s software can be updated on site
  • Easy MP and MMP integration - The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers
  • Optional ME-ARC50 Remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days. It is the only remote, currently, that works with the PT-100 menus.
    •  

    SPECIFICATIONS

    Maximum PV Input Voltage         200 VDC + battery voltage or 240 VDC whichever is lower
    Maximum PV Operating Voltage     187 VDC
    Nominal Battery Voltage Range     12, 24, or 48 VDC
    Battery Charger Output Voltage     10 to 66 VDC
    Maximum Output Power     6600 Watts
    Peak (and full power) Efficiency >99% (98% typical)
    Charger Regulation Method      Automatic three-stage (Bulk, Absorption, Float) Charge with Manual Equalization
    Overcurrent Protection      With Two Overlapping Circuits
    Operating Temperature     -28°C to +60°C (-4°F to 140°F)
    Operating Humidity      0 - 95% RH Non-Condensing
    Enclosure Type     Indoor, Ventilated, with Removable Powder-Coated Conduit Box
    Warranty     Five Years Parts and Labor
    Weight     12.5 lb (5.7 kg)
    Dimensions     8.5" x 15.5" x 4.0" (21.6 cm x 39.4 cm x 10.2 cm)

    Nous vous recommandons également

    20A 12/24V PWM Charge Controller

    20A 12/24V PWM Charge Controller
    30A 12/24V PWM Charge Controller

    30A 12/24V PWM Charge Controller

    Épargnez $20
    30A 12/24V PWM Charge Controller

    30A 12/24V PWM Charge Controller
    30A 36/48V PWM Charge Controller

    30A 36/48V PWM Charge Controller
    EpSolar eBox Bluetooth Adapter

    EpSolar eBox Bluetooth Adapter