|
Nominal Battery Voltages
|
12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
|
|
Maximum Output Current
|
80 amps @ 104° F (40°C) with adjustable current limit
|
|
Maximum Solar Array STC Nameplate
|
12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC systems 6250 Watts
|
|
NEC Recommended Solar Array STC Nameplate
|
12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
|
|
PV Open Circuit Voltage (VOC)
|
150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
|
|
Standby Power Consumption
|
Less than 1 Watt typical
|
|
Power Conversion Efficiency
|
97.5% @ 80 Amps in a 48 VDC System - Typical
|
|
Charging Regulation
|
Five Stages: Bulk, Absorption, Float, Silent and Equalization
|
|
Voltage Regulation Set points
|
10 to 80 VDC user adjustable with password protection
|
|
Equalization Charging
|
Programmable Voltage Setpoint and Duration - Automatic Termination when completed
|
|
Battery Temperature Compensation
|
Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
|
|
Voltage Step-Down Capability
|
Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
|
|
Programmable Axillary Control Output
|
12 VDC output signal which can be programmed for different control applications
(Maximum of 0.2 amps DC)
|
|
Status Display
|
3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
|
|
Remote Display and Controller
|
Optional Mate or Mate2 with RS232 Serial Communications Port
|
|
Network Cabling
|
Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
|
|
Data Logging
|
Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
|
|
Hydro Turbine Applications
|
Consult factory for approved Turbines
|
|
Positive Ground Applications
|
Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
|
|
Operating Temperature Range
|
Minimum -40° to maximum 60° C
(Power capacity of the controller is automatically derated when operated above 40° C)
|
|
Environmental Rating
|
Indoor Type 1
|
|
Conduit Knockouts
|
One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
|
|
Warranty
|
Standard 5 year / Available 10 Year
|
|
Weight - Unit
|
12.20 lbs (5.56 kg)
|
|
- Shipping
|
15.75 lbs (7.10 kg)
|
|
Dimensions - Unit
|
16.25" x 5.75" x 4" (41.3 x 14 x 10 cm) -
(H x W x D)
|
|
- Shipping
|
21" x 10.5" x 9.75" (53 x 27 x 25 cm)
|
|
Options
|
Remote Temperature Sensor (RTS), HUB 4,
HUB 10, MATE, MATE 2
|
