Victron Energy SmartSolar 100/30 30A MPPT Charge Controller

Victron Energy SmartSolar 100/30 30A MPPT Charge Controller

  • $179.99

Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

For a wired data connection to a Color Control GX, other GX products, PC or other devices

Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
The full output current up to 40°C (104°F).

Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.

Internal temperature sensor
Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.

 SmartSolar Charge Controller  MPPT 100/30
 Battery voltage  12/24V Auto Select
 Rated charge current  30A
 Nominal PV power, 12V  440W 
 Nominal PV power, 24V  880W
 Maximum PV open circuit voltage  100V
 Max. PV short circuit current  35A
 Maximum efficiency  98%
 Self-consumption  12V: 30 mA 24V: 20 mA
 Charge voltage 'absorption'  Default setting: 14,4V / 28,8V (adjustable)
 Charge voltage 'float'  Default setting: 13,8V / 27,6V (adjustable)
 Charge algorithm  multi-stage adaptive
 Temperature compensation  16 mV / °C resp. -32 mV / °C
 Protection  PV reverse polarity, Output short circuit, Over temperature
 Operating temperature  -30 to +60°C (full rated output up to 40°C)
 Humidity  95%, non-condensing
 Data communication port  VE.Direct
 Colour  Blue (RAL 5012)
 Power terminals  16 mm² / AWG6
 Protection category  IP43 (electronic components), IP22 (connection area)
 Weight  1.3 kg
 Dimensions (h x w x d)  130 x 186 x 70 mm

We Also Recommend