Victron SmartSolar 250/100-Tr VE.CAN 100A MPPT Charge Controller
Victron Energy SmartSolar 250/100-Tr VE.CAN 100A MPPT Charge Controller
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronize SmartSolar Charge Controllers.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.
Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.
The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
VE.Direct or VE.Can
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Synchronized parallel charging with VE.Can or Bluetooth
Up to 25 units can be synchronized with VE.Can, and up to 10 units with Bluetooth.
Remote on-off
To connect for example to a VE.BUS BMS.
Programmable relay
Can be programmed to trip on an alarm, or other events.
Optional: SmartSolar pluggable LCD display
Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
SmartSolar Charge Controller | 250/100 |
Battery voltage | 12 / 24 / 48V Auto Select |
Rated charge current | 100A |
Nominal PV power, 12V | 1450W |
Nominal PV power, 24V | 2900W |
Nominal PV power, 36V | 4350W |
Nominal PV power, 48V | 5800W |
Max. PV short circuit current | 70A |
Maximum PV open circuit voltage |
250V absolute maximum coldest conditions 245V start-up and operating maximum |
Maximum efficiency | 98% |
Self-consumption | Less than 35mA @ 12V / 20mA @ 48V |
Charge voltage 'absorption' |
Default setting: 14,4 / 28,8 / 43,2 / 57,6V (adjustable with: rotary switch, display, VE.Direct or Bluetooth) |
Charge voltage 'float' |
Default setting: 13,8 / 27,6 / 41,4 / 55,2V (adjustable: rotary switch, display, VE.Direct or Bluetooth) |
Charge voltage 'equalization' |
Default setting: 16,2V / 32,4V / 48,6V / 64,8V (adjustable) |
Charge algorithm | multi-stage adaptive (eight preprogrammed algorithms) or user defined algorithm |
Temperature compensation | -16 mV / -32 mV / -64 mV / °C |
Protection | PV reverse polarity / Output short circuit / Over temperature |
Operating temperature | -30 to +60°C (full rated output up to 40°C) |
Humidity | 95%, non-condensing |
Maximum altitude | 5000m (full rated output up to 2000m) |
Environmental condition | Indoor, unconditioned |
Pollution degree | PD3 |
Data communication port | VE.Can, VE.Direct or Bluetooth |
Remote on/off | Yes (2 pole connector) |
Programmable relay | DPST AC rating: 240VAC / 4A DC rating: 4A up to 35VDC, 1A up to 60VDC |
Parallel operation | Yes, parallel synchronised operation with VE.Can (max. 25 units) or Bluetooth (max. 10 units) |
ENCLOSURE | |
Colour | Blue (RAL 5012) |
PV terminals | Three pairs of MC4 connectors (MC4 model) |
Battery terminals | 35mm² / AWG2 |
Protection category | IP43 (electronic components), IP22 (connection area) |
Weight | 4.5 kg |
Dimensions (h x w x d) | 216 x 295 x 103 mm |
STANDARDS | |
Safety | EN/IEC 62109-1, UL 1741, CSA C22.2 |